hot water shut off valve

[Init1]

Anybody found a source for angled hot water shut valves for flathead?
Seems they don't exist. Just the 90 degree type.

[4dFord/SC]

Found this on Google: http://antique-auto-parts.com/zencar...lve-p-303.html

[Ian NZ]

The original hot water heater valve that screws into the cylinder head hose fitting comes out at a 45D angle

[1948F-1Pickup]

Old thread and nobody's probably looking but
these are the 45-degree style. (Four Seasons
84790)

http://www.opticatonline.com/part/fo...heater-fitting

[paul2748]

If your looking for a heater/water valve, just go to ebay and put in heater valve. All sorts of different valves.

[Ken/Alabama]

Sponsored Links (Register now to hide all advertisements)

Originally Posted by Ian NZ

The original hot water heater valve that screws into the cylinder head hose fitting comes out at a 45D angle

What year you referring to?? I know the correct ones for 39&40 are 90 degrees but the valve that you turn is on a horizontal plane and not vertical like the repops are made.

[Newc]

Hi all; : Note that the valve and stem of the modern NAPA part will fit the original valve body and make it work. The seat in the originals is usually good. Curiously, I've notice a lot of Junk engines still have these in their heads. Newc

[19Fordy]

4dFord/SC: The site you posted comes out in a foreign language. Is it a Zen thing?
http://antique-auto-parts.com/zencar...lve-p-303.html

[54vicky]

Originally Posted by 19Fordy

4dFord/SC: The site you posted comes out in a foreign language. Is it a Zen thing?
http://antique-auto-parts.com/zencar...lve-p-303.html

I am pretty sure he realizes that by now.if not after 4 years he may not care.people should look more closely at date of postings before replying.

[Highboy34]

Balkamp made one which I found on ebay.

[JSeery]

Anyone have some photos of different original valves?