The Ford Barn

John/CT · 09-20-2016, 08:04 AM

Club member had a shift lever break on a recent tour. He was able to nurse it home with some gentle, judicious shifting. The rebuilt tower was less than 6 months old. Snyder's acknowledged the problem and replaced the entire tower paying shipping both ways.

The only shifters they can get are manufactured in two piece. The parts are threaded, screwed together, welded and chromed. Some of the welds are not perfect. Unless you shift very gently the weld could fail.

Bravo to Snyder's for handling the problem professionally.

09-20-2016, 08:04 AM	#19
John/CT Member Join Date: May 2010 Location: Eastern Connecticut Posts: 50	Re: transmission shift lever Club member had a shift lever break on a recent tour. He was able to nurse it home with some gentle, judicious shifting. The rebuilt tower was less than 6 months old. Snyder's acknowledged the problem and replaced the entire tower paying shipping both ways. The only shifters they can get are manufactured in two piece. The parts are threaded, screwed together, welded and chromed. Some of the welds are not perfect. Unless you shift very gently the weld could fail. Bravo to Snyder's for handling the problem professionally.