The Ford Barn

felix37 · 10-27-2015, 10:47 AM

Hi Guy's Sorry I haven't been on here in a while, I have been super busy attending to our woodgrain services. For those of you who have used our services and have chimed in on this thread, Thank you very much! without your continued support and good words we wouldn't be where we are today. For those of you who are new to us, let me tell you a little about our services. we utilize the factory original process with original factory graining plates for the most authentic reproduction possible. there are many other options out there and they all have there place.. We have guy's that do the artistic brush and rag technique and the water dip process using a printed film, these are good options if originality is not important such as for streetrods etc.. That being said, there are also others doing the original process as us and using some of the same products as us, but the real difference is, We are restoration shop that consistently puts out restorations that win at Pebble Beach and Amelia island. We have a state of the art facility with a full down draft paint booth and all parts are finished with PPG products and baked before they are carefully crated and shipped to your door. We aren't working out of our basement, but our prices are competitive with our competition that do. We consider all of our customers as friends and family and treat them as such.. I can honestly say that since we offered this service to the public a little over three years ago, We have not had one complaint! I thank you all!
If any of you are coming through Chattanooga and want to visit our facility, give me a call. 870-847-1921 Jonathan Myren and Johnathan Sullivan We will be glad to give you a tour through the shop and the museum... after all, we are just car guys like you.

10-27-2015, 10:47 AM	#11
felix37 Senior Member Join Date: Oct 2010 Location: Chattanooga, TN Posts: 1,093	Re: Looking for a " Garnish moulding painter" Hi Guy's Sorry I haven't been on here in a while, I have been super busy attending to our woodgrain services. For those of you who have used our services and have chimed in on this thread, Thank you very much! without your continued support and good words we wouldn't be where we are today. For those of you who are new to us, let me tell you a little about our services. we utilize the factory original process with original factory graining plates for the most authentic reproduction possible. there are many other options out there and they all have there place.. We have guy's that do the artistic brush and rag technique and the water dip process using a printed film, these are good options if originality is not important such as for streetrods etc.. That being said, there are also others doing the original process as us and using some of the same products as us, but the real difference is, We are restoration shop that consistently puts out restorations that win at Pebble Beach and Amelia island. We have a state of the art facility with a full down draft paint booth and all parts are finished with PPG products and baked before they are carefully crated and shipped to your door. We aren't working out of our basement, but our prices are competitive with our competition that do. We consider all of our customers as friends and family and treat them as such.. I can honestly say that since we offered this service to the public a little over three years ago, We have not had one complaint! I thank you all! If any of you are coming through Chattanooga and want to visit our facility, give me a call. 870-847-1921 Jonathan Myren and Johnathan Sullivan We will be glad to give you a tour through the shop and the museum... after all, we are just car guys like you.