The Ford Barn

colin1928 · 09-25-2015, 05:04 PM

It is possible to do it with the timing cover and the pulley remover but it hard to pack it in to the sump groove tightly enough while the crankshaft still there
can be done just takes time

Dtolson · 09-25-2015, 07:12 PM

Thanks for the reply. I would rather not remove the pan since the leak is only in the front at the crank.

09-25-2015, 05:04 PM	#1
colin1928 Senior Member Join Date: Mar 2013 Location: Australa Melbourne Posts: 878	Re: Rope seal It is possible to do it with the timing cover and the pulley remover but it hard to pack it in to the sump groove tightly enough while the crankshaft still there can be done just takes time

09-25-2015, 07:12 PM	#2
Dtolson Member Join Date: Jun 2013 Location: KY Posts: 81	Re: Rope seal Thanks for the reply. I would rather not remove the pan since the leak is only in the front at the crank. __________________ Big D