|
|||||||
| Sponsored Links (Register now to hide all advertisements) |
|
|
![]() |
|
Thread Tools | Display Modes |
|
|
#1 |
|
Junior Member
Join Date: Jan 2015
Location: Pennsylvania
Posts: 6
|
Good Evening All, need a little help with locating the front leaf spring bolts. Any one have any photos or part number for those bolts, mine are worn bad. Any help is greatly appreciated. 1 1/2 ton 1941 Ford
Last edited by Ccullum; 09-02-2015 at 07:39 PM. |
|
|
|
|
|
#2 |
|
Senior Member
Join Date: May 2010
Location: So Cal
Posts: 9,598
|
Part number 355521-S 3/8"-24 x 7" Special square head bolt.
Bob |
|
|
|
| Sponsored Links (Register now to hide all advertisements) |
|
|
|
|
#3 |
|
Senior Member
Join Date: May 2010
Posts: 914
|
What bolts where?
|
|
|
|
|
|
#4 |
|
Junior Member
Join Date: Jan 2015
Location: Pennsylvania
Posts: 6
|
That is the tie bolt, thank you for that, I am looking for the shackle bolt/bushing/pin, that connects the leaf springs to the shackles. In the front.
There are a total of six of these, three on each spring, square ends with crown nuts on each end. |
|
|
|
|
|
#5 |
|
Senior Member
Join Date: Jul 2010
Location: UPSTATESC
Posts: 669
|
measure the width and dia. I may have a few, also requires a very thick washer. on 42 up these were changed to a slightly different set up. try chuck's truck in conn, I believe,
|
|
|
|
|
|
#6 |
|
Junior Member
Join Date: Jan 2015
Location: Pennsylvania
Posts: 6
|
Sponsored Links (Register now to hide all advertisements)
The length is 4 1/2" tip to tip, with approx 5/8" square ends and approx 1/2" maybe 7/16" dia thread tips where the crown nuts go on. |
|
|
|
![]() |
|
|
| Sponsored Links (Register now to hide all advertisements) |
|
|