The Ford Barn

bullrunmotor · 01-03-2015, 07:58 AM

Can anybody tell me if a 1935 4 Dr. Sedan Front Seat will interchange with a 1935 Coupe Front Seat-both are bench seats-but I can't find any specs regarding sizes. I need a good seat for my Coupe and have found a 4 Dr that is getting the street rod treatment so the interior is avaialble. Thanks in advance.

uncle buck · 01-03-2015, 02:24 PM

Yes, physically it will fit and serve its function. If you are worried about correctness , its totally different

flathead47 · 01-03-2015, 09:43 PM

X2 what Uncle Buck states.

The metal base of the 4dr seat is the same as the coupe metal base.
The lower metal side connection plate attached to the coupe side wood is different , but I believe Bob Drake is or will be reproducing this plate.
Wood kits are available for the back frame & both seat spring assemblies , so you can make a coupe seat assembly.

JM 35 Sedan · 01-03-2015, 11:06 PM

Quote:

Originally Posted by bullrunmotor

Can anybody tell me if a 1935 4 Dr. Sedan Front Seat will interchange with a 1935 Coupe Front Seat-both are bench seats-but I can't find any specs regarding sizes. I need a good seat for my Coupe and have found a 4 Dr that is getting the street rod treatment so the interior is avaialble. Thanks in advance.

Are you located in Northern Virginia? If you would rather have a '35 coupe seat, I may be able to help. Send me a pm if you have any interest.

rich b · 01-04-2015, 12:13 AM

Quote:

Originally Posted by flathead47

X2 what Uncle Buck states.

The metal base of the 4dr seat is the same as the coupe metal base.
The lower metal side connection plate attached to the coupe side wood is different , but I believe Bob Drake is or will be reproducing this plate.
Wood kits are available for the back frame & both seat spring assemblies , so you can make a coupe seat assembly.

Who is the source of the seat back wood? Thanks

Randy in ca · 01-04-2015, 11:47 AM

Sponsored Links (Register now to hide all advertisements)

Quote:

Originally Posted by rich b

Who is the source of the seat back wood? Thanks

-

WoodArt

http://www.fordwoodart.com/

rich b · 01-04-2015, 01:19 PM

Quote:

Originally Posted by Randy in ca

-

WoodArt

http://www.fordwoodart.com/

Thanks, I really should have thought of them; but never noticed they had the wood for back cushion.

01-03-2015, 07:58 AM	#1
bullrunmotor Senior Member Join Date: May 2010 Location: Virginia Posts: 229	1935 Ford Front Seats-Dimensions Can anybody tell me if a 1935 4 Dr. Sedan Front Seat will interchange with a 1935 Coupe Front Seat-both are bench seats-but I can't find any specs regarding sizes. I need a good seat for my Coupe and have found a 4 Dr that is getting the street rod treatment so the interior is avaialble. Thanks in advance.

01-03-2015, 02:24 PM	#2
uncle buck Senior Member Join Date: May 2010 Location: Snohomish,WA Posts: 1,131	Re: 1935 Ford Front Seats-Dimensions Yes, physically it will fit and serve its function. If you are worried about correctness , its totally different

01-03-2015, 09:43 PM	#3
flathead47 Member Join Date: Dec 2010 Location: Toronto , Ontario Posts: 98	Re: 1935 Ford Front Seats-Dimensions X2 what Uncle Buck states. The metal base of the 4dr seat is the same as the coupe metal base. The lower metal side connection plate attached to the coupe side wood is different , but I believe Bob Drake is or will be reproducing this plate. Wood kits are available for the back frame & both seat spring assemblies , so you can make a coupe seat assembly.