The Ford Barn

glenn in camino · 06-19-2010, 05:11 PM

What is the correct finish on the metal STOP sign inside drum tailight.

Bobster · 06-19-2010, 05:15 PM

I bought mine from a reputable Ford source - it is red with "STOP" outlined in black on the inside of the globe. Does this answer your question? BW

d. · 06-19-2010, 06:19 PM

There was no Ford factory issued STOP (cut in the glass) lens. What you have is 70's bad repro. The original STOP was a die cut steel piece that is still offered by reputible dealers such as Bratton's. The STOP die cut piece is inserted between the lens and the stop light body with thin gaskets on both sides.

Roadster62 · 06-19-2010, 06:41 PM

Haven't had an A tail light apart in a while, but the 26-27 T Factory STOP light had that piece cad plated.

Quote:

Originally Posted by glenn in camino

What is the correct finish on the metal STOP sign inside drum tailight.

Rowdy · 06-20-2010, 01:06 AM

Sponsored Links (Register now to hide all advertisements)

Not sure what the finish of the incert stop plate was originnally, but the one that I nearly have ready to sell here is now black. Still need to rivit the brake light contact back in then repaint the outside. Or atleast I would think that rivit was painted with the back of the licence plate holder. Rod

06-19-2010, 05:11 PM	#1
glenn in camino Senior Member Join Date: May 2010 Location: Camino, CA. Posts: 3,086	28 drum tailight What is the correct finish on the metal STOP sign inside drum tailight.

06-19-2010, 05:15 PM	#2
Bobster Member Join Date: May 2010 Location: Huntington, WV Posts: 52	Re: 28 drum tailight I bought mine from a reputable Ford source - it is red with "STOP" outlined in black on the inside of the globe. Does this answer your question? BW __________________ BW in WV

06-19-2010, 06:19 PM	#3
d. Senior Member Join Date: May 2010 Location: Raleigh, NC Posts: 510	Re: 28 drum tailight/ totally wrong There was no Ford factory issued STOP (cut in the glass) lens. What you have is 70's bad repro. The original STOP was a die cut steel piece that is still offered by reputible dealers such as Bratton's. The STOP die cut piece is inserted between the lens and the stop light body with thin gaskets on both sides.

06-20-2010, 01:06 AM	#5
Rowdy BANNED Join Date: May 2010 Location: Gothenburg Nebraska Just off I-80 Posts: 4,893	Re: 28 drum tailight Sponsored Links (Register now to hide all advertisements) Not sure what the finish of the incert stop plate was originnally, but the one that I nearly have ready to sell here is now black. Still need to rivit the brake light contact back in then repaint the outside. Or atleast I would think that rivit was painted with the back of the licence plate holder. Rod __________________ Do the RIGHT thing - Support the H.A.M.B. Alliance!!!!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode