28 drum tailight
 

What is the correct finish on the metal STOP sign inside drum tailight.

Re: 28 drum tailight
 

I bought mine from a reputable Ford source - it is red with "STOP" outlined in black on the inside of the globe. Does this answer your question? BW

Re: 28 drum tailight/ totally wrong
 

There was no Ford factory issued STOP (cut in the glass) lens. What you have is 70's bad repro. The original STOP was a die cut steel piece that is still offered by reputible dealers such as Bratton's. The STOP die cut piece is inserted between the lens and the stop light body with thin gaskets on both sides.

Re: 28 drum tailight
 

Haven't had an A tail light apart in a while, but the 26-27 T Factory STOP light had that piece cad plated. :)

Re: 28 drum tailight
 

Not sure what the finish of the incert stop plate was originnally, but the one that I nearly have ready to sell here is now black. Still need to rivit the brake light contact back in then repaint the outside. Or atleast I would think that rivit was painted with the back of the licence plate holder. Rod