|
|||||||
| Sponsored Links (Register now to hide all advertisements) |
|
|
|
Thread Tools | Display Modes |
|
|
#2 |
|
Senior Member
Join Date: May 2010
Location: Illinois
Posts: 2,249
|
Endplay is controlled by the spider gear cross fit to the axles. Both axles should have the same endplay. If only one side moves There must be something wrong on that side. I would guess hub to axle fit.You might remove the hub and see if axle still has play.If the carrier bearings were bad it still should show up on both sides.
John |
|
|
|
| Sponsored Links (Register now to hide all advertisements) |
|
|
| Thread Tools | |
| Display Modes | |
|
|
| Sponsored Links (Register now to hide all advertisements) |
|
|