|
|||||||
| Sponsored Links (Register now to hide all advertisements) |
|
|
![]() |
|
Thread Tools | Display Modes |
|
|
#21 |
|
Senior Member
Join Date: Dec 2010
Location: North of sandy ago, CA.
Posts: 2,080
|
These are most likely field mice, you cannot appreciate pack rats until you have them.
They like small parts, shinney stuff, bolts and nuts. They use the padding from the seats to make their nests. For protection they use jumping cacti. I have found those little guys can carry a lot. I found a 3/8X5 bolt on the floorboard of my forklift. The nest was on the engine, between the head and manifold. Bruce
__________________
Works good Lasts long time |
|
|
|
|
|
#22 |
|
Senior Member
Join Date: Jul 2014
Location: Iowa
Posts: 1,634
|
I bow to no one in my admiration of cars restored to as close to original as possible,
but find a large number are shown, but not driven much, if any. "Rouge" class cars are particularly interesting. For many of the rest of us, driving the cars is the source of satisfaction and pride. To do so often requires modest revisions for safety's sake. Unless we are willing to accommodate both camps, our hobby will continue to wither. |
|
|
|
| Sponsored Links (Register now to hide all advertisements) |
|
|
|
|
#23 |
|
Senior Member
Join Date: Jun 2010
Location: West Hammond, Illinois
Posts: 2,851
|
Found this mouse skeleton in my car.
It dropped out of the front seat. |
|
|
|
|
|
#24 |
|
Senior Member
Join Date: Oct 2010
Location: Hancock, MA
Posts: 2,818
|
I had that too. First time it started there was mouse nests for 20 feet behind the car
__________________
Short URL: http://smu.gs/14g7eDW |
|
|
|
|
|
#25 |
|
Senior Member
Join Date: Sep 2013
Location: Florida
Posts: 635
|
So THAT'S what that stuff is. Hmmmm.....
__________________
Do I look like I have a plan B? |
|
|
|
|
|
#26 |
|
Senior Member
Join Date: Oct 2010
Location: Hancock, MA
Posts: 2,818
|
Sponsored Links (Register now to hide all advertisements)
__________________
Short URL: http://smu.gs/14g7eDW |
|
|
|
|
|
#27 |
|
Senior Member
Join Date: Jan 2011
Location: Massachusetts
Posts: 465
|
Damn!!! Don't breathe that dust, it'll kill you.
|
|
|
|
|
|
#28 |
|
Senior Member
Join Date: May 2010
Location: Ft Mohave,Az
Posts: 2,011
|
Remember this . I found in it while changing the tranny fluid in my newly acquired 34 roadster. There was also a medium sized nest in the gas tank & one down in the valley of the trunk where it meets the rear panel. Consensus of opinion was it is/was an acorn.
|
|
|
|
|
|
#29 |
|
Senior Member
Join Date: Jun 2010
Location: West Hammond, Illinois
Posts: 2,851
|
Found in the engine compartment. Mostly on the frame pieces.
|
|
|
|
|
|
#30 |
|
Senior Member
Join Date: May 2010
Location: Sydney, Australia
Posts: 949
|
[Quote] "leave it the way it is" and "It's only original once". This is usually from guys with pristine restored cars.
I wonder why those guys would say that. Do they know something... |
|
|
|
|
|
#31 | |
|
Senior Member
Join Date: May 2010
Location: Lower Hutt , New Zealand
Posts: 2,167
|
Quote:
Sorry to go off subject but In have to ask you what is the bike in the background? GB
__________________
"you can't make honey out of dog sh*t" "You're a long time looking at the lid" |
|
|
|
|
|
|
#32 |
|
Senior Member
Join Date: May 2010
Location: Gerrardstown, WV
Posts: 2,303
|
I have a friend in RG 36 who used to drive his '51 everywhere and then he got on the Dearborn award kick and he told me a while back to never restore my '50 Ford because I can still drive mine.
|
|
|
|
|
|
#33 | |
|
Senior Member
Join Date: Sep 2013
Posts: 3,157
|
Quote:
Tell them to buy a car and store it in a special climate controlled room for posterity! You bought the car because you like it and want to have fun with it! Life is too short So save the car as it is and never get in it for fear of wearing it out. You might as well never buy it. I have an original 1933 ford with most everything original including the interior. I replaced the floor mats because the original ones are shreaded. Fortunately the interior is great but if I jad found a car that needed new seats I would have replaced them. Don;t just sit ina piece of decaying debrie for histories sake. You are not running the smithsonian mueseum. You bought the car for fun, enjoy it. Nothing lasts forever .. the car or you....enjoy what you paid for. Have fun with you car, fix what needs to be fixed to make it nice and enjoyable. Don't just tear out the old because it has gotten a little dingy, but replace portions of those things that are ratty and make it unpleasant for you to sit in your car. PS I know people that buy old comic books sealed in plastic holders than graded and can never be opened. That is very sad. |
|
|
|
|
|
|
#34 |
|
Senior Member
Join Date: Sep 2013
Location: Joplin, Missouri
Posts: 357
|
Mice can sure cause problems!!
Kevin
__________________
"Failure is simply the opportunity to begin again, this time more intelligently". Henry Ford. |
|
|
|
|
|
#35 |
|
Member
Join Date: Aug 2014
Location: Illinois
Posts: 95
|
Don't listen to anyone. And do what you think is best for you and your car.
__________________
"Thrifty Sixty" Ford V8 for 1938 |
|
|
|
|
|
#36 |
|
Senior Member
Join Date: May 2010
Location: Northern California,coast
Posts: 552
|
SAY IT AGAIN.... Vic, ...Say it again ........OLD.....BILL
|
|
|
|
|
|
#37 |
|
Senior Member
Join Date: Sep 2013
Posts: 3,157
|
I know another guy who bought a very expensive perfectly restored car that he is now to afraid to drive because he might scratch or damage or wear something out. He should have just bought a plastic model and saved a fortune.
Have fun with you car Build memories of using it and working on it Because the day will come when you and all of us will be too old to drive it and then we at least would have great memories of owning a classic car and have fun with it like so many countless millions of people did in the 1930's, 1940's and they are now gone too. |
|
|
|
|
|
#38 |
|
Senior Member
Join Date: Oct 2010
Location: Hancock, MA
Posts: 2,818
|
Like I said I am fixing it the way I want, I was just laughing that someone would drive with that crap up there rather than tear up the "Original" stuff. Also like the original hose clamps that leaked like crazy.... New ones work fine.
__________________
Short URL: http://smu.gs/14g7eDW |
|
|
|
|
|
#39 |
|
Senior Member
Join Date: May 2010
Location: Odessa, FL
Posts: 7,612
|
You know, I build my cars/trucks (Flatheads and otherwise) to be drivers, because that's the way I want them. I respect others that want to built their Flatheads "as Henry built them", but I don't respect anyone that tries to force their opinion on someone who thinks differently. That is, unless they want to finance my builds for me...
LOL I'll consider taking suggestions, on how to otherwise build my vehicles, as long as those suggestions are accompanied by a sizeable donation to the cause...
__________________
Imagination is more important than knowledge. |
|
|
|
|
|
#40 |
|
Senior Member
Join Date: Oct 2010
Location: Hancock, MA
Posts: 2,818
|
Vic,
From a philosophy stand point I am in your camp, I don't care that much to go to meetings and talk about cars, or sit in front of it and display it (although I do like to look at other cars so there is a trade off there). I want to work on them and drive them. I will have a concourse type car when I have amassed the skills to do it myself (at which point I would probably turn around and sell it to get another project). So far, other than buying the wiring harness and having someone else rebuild the carb and fuel pump, I have done all the work on my car myself. When I first got the car I got some advice; "Everybody you meet will have advice for you, most of it wrong. Chose wisely who you listen to and make your own choices".
__________________
Short URL: http://smu.gs/14g7eDW |
|
|
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|
| Sponsored Links (Register now to hide all advertisements) |
|
|