Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)
Reload this Page Question For The Engine Experts

Sponsored Links (Register now to hide all advertisements)

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 10-09-2012, 02:19 AM   #4
Gary Duff
Junior Member
 
Join Date: May 2010
Posts: 23
Default Re: Question For The Engine Experts
Joe
That main bearing was made by Ford for heavy clutch use in busses etc.
It provided additional lube oil to the rear thrust face. The part number
was 81B-6331-whatever undersize letter. The ones I have seen from
Ford had a hand scraped area were yours had the groove cut. Also no
lube notchs cut in the thrust faces. Hope this helps.
Gary
Gary Duff is offline   Reply With Quote
 

« Previous Thread | Next Thread »
Thread Tools
Display Modes
Threaded Mode Threaded Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 05:17 AM.