trans shift stick Question [35/36]

[Kube]

Originally Posted by Newc

According to the Vanpelt site a 7210 shifter is good for 35? to 51. the straight tops on the transmissions. Correct ?? customer wants to install a'39 [double detent] in his '35 and use his original shift stick. thanks Newc

I've done this and as I recall, you can use the 35 stick with modification. Seems to me I swapped the "lower ends", IE the part within the shift tower. You must line up the piece to be swapped into place quite carefully before welding to the 35 stick.