|
|||||||
| Sponsored Links (Register now to hide all advertisements) |
|
|
|
Thread Tools | Display Modes |
|
|
#2 |
|
Senior Member
Join Date: Jan 2015
Location: San Jose California
Posts: 159
|
With an inserted engine and full flow filter using 10w30 detergent oil I change oil every 1500 miles. Everyone's situation is different regarding oil changes. Today's oils are much better then when the A was built. One thousand mile intervals will probably work depending on road conditions on a non filtered engine. If you are running an inserted engine I personally would recommend using a full flow filter. As far as operating hours go based on you average speed, divide the miles traveled by your average speed will give you the operating hours.
|
|
|
|
| Sponsored Links (Register now to hide all advertisements) |
|
|
| Thread Tools | |
| Display Modes | |
|
|
| Sponsored Links (Register now to hide all advertisements) |
|
|