Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 03-01-2018, 12:00 AM   #11
Tom Wesenberg
Senior Member
 
Tom Wesenberg's Avatar
 
Join Date: May 2010
Location: Mpls, MN
Posts: 27,582
Default Re: Getting my 1931 Model A Coupe go start

A 6 volt battery in good condition should show about 6.3 to 6.4 volts, especially right after the charger has been on it. You'll get a higher reading from the charger just being on it, but if you turn the lights on for 15 seconds, then turn them off and read the voltage, you should have 6.3 or close to it.


Try hand cranking the engine to be sure the starter drive isn't jammed in the flywheel teeth.
Tom Wesenberg is offline   Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 06:41 AM.