The Ford Barn

JRHASZARD · 02-14-2026, 07:52 AM

I am rebuilding my 1930 Tudor and have yet to install the body. I came across a four pipe train whistle with the control valve at Bert’s some years ago. I would like to install it now but wonder where others have theirs. The diameter of the valve connector is the larger size, like the pipe from manifold to muffler.Aft of the muffler is a smaller diameter. I am assuming the obvious that it would install below the manifold, but since I have a new stainless exhaust from Snyders I don’t want to mess up the costly pipe by making a mistake.
Also, I have a floor button that is spring loaded that looks like it would work as the operating control. It seems to be cast aluminum alloy.
If anyone has knowledge about this installation I would be happy to hear about it.

02-14-2026, 07:52 AM	#1
JRHASZARD Senior Member Join Date: Jun 2010 Location: Ophelia,Va. Posts: 231	Exhaust whistle I am rebuilding my 1930 Tudor and have yet to install the body. I came across a four pipe train whistle with the control valve at Bert’s some years ago. I would like to install it now but wonder where others have theirs. The diameter of the valve connector is the larger size, like the pipe from manifold to muffler.Aft of the muffler is a smaller diameter. I am assuming the obvious that it would install below the manifold, but since I have a new stainless exhaust from Snyders I don’t want to mess up the costly pipe by making a mistake. Also, I have a floor button that is spring loaded that looks like it would work as the operating control. It seems to be cast aluminum alloy. If anyone has knowledge about this installation I would be happy to hear about it.