The Ford Barn

3W Hank · 06-22-2024, 01:48 PM

I can't say what tolerances this program has ( I used one I found on internet ) so I did not get the math the old way by paper and pen, but it can be changes vs several other things. But if one think the tires not get taller under speed and set in 31.5" it's show 2.650 RPM and that is at 90 km/h or 56 MPH.
Either way it will be learned if it feels Ok or not.
On going in normal traffic one do not really like get slower than 50 MPH.

Regards the clutch, this is old tech so even there one will learn if it will hold on.

06-22-2024, 01:48 PM	#22
3W Hank Senior Member Join Date: Feb 2022 Posts: 577	Re: Auburn Clutch I can't say what tolerances this program has ( I used one I found on internet ) so I did not get the math the old way by paper and pen, but it can be changes vs several other things. But if one think the tires not get taller under speed and set in 31.5" it's show 2.650 RPM and that is at 90 km/h or 56 MPH. Either way it will be learned if it feels Ok or not. On going in normal traffic one do not really like get slower than 50 MPH. Regards the clutch, this is old tech so even there one will learn if it will hold on.