|
|||||||
| Sponsored Links (Register now to hide all advertisements) |
|
|
![]() |
|
Thread Tools | Display Modes |
|
|
#1 |
|
Member
Join Date: Apr 2015
Location: old orchard beach maine
Posts: 64
|
I like to be safe when driving my 35 wagon, especially now with everyone eyes on their phones. So I have put together an added stop light. I got a 35 hubcap, and cut out the center V8 (about 3"). I purchased a new small STOP assembly and inserted the STOP light in the hole. Trying to make the lens flush with the hubcap looked to be a real hassle, so I set the STOP to project from the cap... I secured the whole thing with HD adhesive and CA glue. It will be installed when I get the car out of storage.
I also have a flashing LED strip in the rear window. Oh, and I also have yellow flasher mounted under the tailgate which I have on all the time... I hope "they" can see me!! |
|
|
|
|
|
#2 | |
|
Senior Member
Join Date: May 2015
Posts: 11,644
|
Quote:
|
|
|
|
|
| Sponsored Links (Register now to hide all advertisements) |
|
|
|
|
#3 |
|
Senior Member
Join Date: Jan 2014
Location: Orcas Island Washington
Posts: 6,202
|
Great Idea! Inspires me to do something similar to my wagon. I have just one tail/brake light on mine and when I'm on the interstate it always occurs to me I should have a secondary or two with the modern LED. But then I get back to the island and doesn't occur to me until next trip. Thanks!
__________________
Owner/Operator of 'Jailbar Ranch' on the side of Mt. Pickett. Current stable consists of 1946 1/2 ton pickup turned woodie wagon with FH V8, 1946 Tonner Pickup with 226 H six, 1979 Toyota landcruiser wagon, now wearing 1947 Ford Jailbar sheet metal. 'Rusty ol' floorboards, hot on their feet' (Alan Jackson) |
|
|
|
|
|
#4 |
|
Member
Join Date: Apr 2015
Location: old orchard beach maine
Posts: 64
|
GB .. I do recall that wagons may only have the driver side rear tail light.. I have both on my 35.. When doing this set up I also considered a KD Stop lamp, but they are 6-7" diameter.. and hub cap is about the same. I wanted to be able to snap the cap on and/or remove it as needed. I made a full rear window for mine so that I could get full rear vision, the "glass" is clear plastic and I suction cup attach the LED strip to that. No possible with the canvas rear window. I also have replaced all incandescents with LED.. the red type in the rear... ledlight.com
|
|
|
|
|
|
#5 |
|
Senior Member
Join Date: May 2010
Location: Napa,California
Posts: 6,773
|
Kevin, excellent idea.
|
|
|
|
|
|
#6 |
|
Member
Join Date: Apr 2015
Location: old orchard beach maine
Posts: 64
|
Sponsored Links (Register now to hide all advertisements)
|
|
|
|
![]() |
|
|
| Sponsored Links (Register now to hide all advertisements) |
|
|