|
|
#1 |
|
Member
Join Date: May 2010
Location: Central NC
Posts: 80
|
Barners, I am going to check a used engine tomorrow. Question after I do a compression test can I manually, thru the spark plug hole, feel for a cylinder ridge JR
|
|
|
|
|
|
#2 |
|
Senior Member
Join Date: Oct 2025
Location: Atlanta, Georgia
Posts: 226
|
No not really, the spark plug hole is over the valves not the piston. An inspection camera on the end of a snake might work for a visual.
|
|
|
|
| Sponsored Links (Register now to hide all advertisements) |
|
|
|
|
#3 |
|
Senior Member
Join Date: Jul 2011
Location: SF Bay Area
Posts: 7,634
|
You should know that a compression check on a cold engine can be unreliable. Thoroughly warm it up to full operating temp if possible. On the other hand, low numbers from a cold engine can translate to an excellent bargaining chip for you.
__________________
Alan |
|
|
|
|
|
#4 |
|
Senior Member
Join Date: Jan 2011
Location: Central Ohio
Posts: 5,906
|
Every used engine is a gamble - no matter what the person says, even if they are a friend. What year/type of engine and what sort of price? Also, is there any guarantee as to the condition? Frankly, every used engine I've ever bought, I've ended up rebuilding in a year or two.
|
|
|
|
|
|
#5 |
|
Senior Member
Join Date: Jul 2016
Location: Lake worth Florida
Posts: 1,466
|
Ask if you can pull the intake at minimum and head gaskets are next . Offer new gaskets and installed may help . Its definitely worth the $75 to look inside . If up north ( freeze areas ) check for cracks or water , rust where it should not be .
|
|
|
|
|
|
#6 |
|
Senior Member
Join Date: Sep 2024
Location: California
Posts: 121
|
|
|
|
|
![]() |
|
|
| Sponsored Links (Register now to hide all advertisements) |
|
|