Anyone local in San Diego?

[Ken T]

I'm looking for a someone reputable in San Diego to rebuild my carburetor. Does anyone know someone local that they could recommend?

Carburetor (3).jpg
Carburetor (10).jpg

[tubman]

I'd send it to Charlie Schwendler in New York. With "California Pricing" in effect, the shipping is probably a wash and he is quite simply the best.

[deuce lover]

Check with C&G Ford parts in Escondido. The surely will know of someone near you.

[chap52]

Charley NY is the guy. Here is his email address... Chap

[email protected]

[corvette8n]

I recommend Charlie also, he’ll have your carb turned around in no time
Charlie NY, 1-716-662-9159.

[Kube]

Sponsored Links (Register now to hide all advertisements)

Originally Posted by tubman

I'd send it to Charlie Schwendler in New York. With "California Pricing" in effect, the shipping is probably a wash and he is quite simply the best.

x2 without question.

[Terry,OH]

The top casting is from a 91-99 and the center section is from a 59 if the Carb. is for your avatar suggest finding a 91-99 center section. Ask the rebuilder of your choice if they have one.

[Newc]

Yep; that high float vent does not like high fans. made for the crank mounted fans. Newc

[Ken T]

Originally Posted by Terry,OH

The top casting is from a 91-99 and the center section is from a 59 if the Carb. is for your avatar suggest finding a 91-99 center section. Ask the rebuilder of your choice if they have one.

Sorry with the late response. I haven't logged in for a couple weeks.

Yes, it's for the fire engine that's my avatar. The carburetor is pieced from two different carbs? If it is, thanks for the heads up. I'm learning as I go. It appears either or after the Department of Defense auctioned it off, someone mixed and matched several parts on it.