The Ford Barn

Jim Boehmke · 05-31-2011, 06:53 AM

I'm very familar with the toe-in procedure for a Model A car.
Is the toe-in for an AA truck exacty the same and is the toe-in 1/16 in, + or - 1/32 in, just like the car spec?
Thanx,
Jim

James Rogers · 05-31-2011, 09:50 AM

I believe it is the same.

Kurt in NJ · 05-31-2011, 10:01 AM

The 36 service bulltens gives 3/32 --the same as the car ---then it goes into a correction for toe depending on camber ---it says to add the camber together and set total toe at 1/10 of total camber ---36 was the first year for a "new" rack type of alignment system and they started to get fancy.

Jim Boehmke · 05-31-2011, 10:06 AM

Sponsored Links (Register now to hide all advertisements)

thanks much Kurt. Jim

05-31-2011, 06:53 AM	#1
Jim Boehmke Senior Member Join Date: May 2010 Posts: 344	Toe In for an AA truck I'm very familar with the toe-in procedure for a Model A car. Is the toe-in for an AA truck exacty the same and is the toe-in 1/16 in, + or - 1/32 in, just like the car spec? Thanx, Jim

05-31-2011, 09:50 AM	#2
James Rogers Senior Member Join Date: May 2010 Location: Asheville,NC Posts: 3,104	Re: Toe In for an AA truck I believe it is the same.

05-31-2011, 10:01 AM	#3
Kurt in NJ Senior Member Join Date: May 2010 Location: on the Littlefield Posts: 6,555	Re: Toe In for an AA truck The 36 service bulltens gives 3/32 --the same as the car ---then it goes into a correction for toe depending on camber ---it says to add the camber together and set total toe at 1/10 of total camber ---36 was the first year for a "new" rack type of alignment system and they started to get fancy.

05-31-2011, 10:06 AM	#4
Jim Boehmke Senior Member Join Date: May 2010 Posts: 344	Re: Toe In for an AA truck Sponsored Links (Register now to hide all advertisements) thanks much Kurt. Jim