The Ford Barn - Toe In for an AA truck

The Ford Barn (https://www.fordbarn.com/forum/index.php)

- Model A (1928-31) (https://www.fordbarn.com/forum/forumdisplay.php?f=3)

- - Toe In for an AA truck (https://www.fordbarn.com/forum/showthread.php?t=38452)

Jim Boehmke

05-31-2011 06:53 AM

Toe In for an AA truck

I'm very familar with the toe-in procedure for a Model A car.
Is the toe-in for an AA truck exacty the same and is the toe-in 1/16 in, + or - 1/32 in, just like the car spec?
Thanx,
Jim

James Rogers

05-31-2011 09:50 AM

Re: Toe In for an AA truck

I believe it is the same.

Kurt in NJ

05-31-2011 10:01 AM

Re: Toe In for an AA truck

The 36 service bulltens gives 3/32 --the same as the car ---then it goes into a correction for toe depending on camber ---it says to add the camber together and set total toe at 1/10 of total camber ---36 was the first year for a "new" rack type of alignment system and they started to get fancy.

Jim Boehmke

05-31-2011 10:06 AM

Re: Toe In for an AA truck

thanks much Kurt. Jim

All times are GMT -5. The time now is 04:50 AM.