Fuel pump Push Rod

[Daveyyc]

I have changed the intake manifold on a 59 series V8 for the original style intake which has a lower generator and fuel pump mount. The fuel pump push rod is now too long and needs to be shortened by 1 inch. Can I cut the 1 inch off of the top of the existing rod rather than acquiring the shorter version.

[19Fordy]

The tips of the push rod might be hardened, especially the end that rides on the cam.
Get the correct rod , if possible.

Here's an idea: Make an adjustable push rod.

[Kube]

Originally Posted by 19Fordy

The tips of the push rod might be hardened, especially the end that rides on the cam.
Get the correct rod , if possible.

Here's an idea: Make an adjustable push rod.

100% correct in the hardened tip advice. The early engines used the rod that was 1" shorter than the later rods. They are readily available from Carpenter, etc.

[Daveyyc]

Sponsored Links (Register now to hide all advertisements)

Thank you for the advice. I will go find a shorter pushrod