The Ford Barn - View Single Post

wga · 08-20-2012, 08:14 PM

I used a CRC product - Gasket Remover, and spray on paint remover - the epoxy kind. It softens them a bit. Needs to be kept wet, and soak. Used a right angle CP grinder with a 3M Scrotch Brite eon a mandrel, and went along very very carefully and just kissed the surface.

08-20-2012, 08:14 PM	#2
wga Senior Member Join Date: Jul 2010 Location: Yorba Linda, CA Posts: 972	Re: "best" head gasket I used a CRC product - Gasket Remover, and spray on paint remover - the epoxy kind. It softens them a bit. Needs to be kept wet, and soak. Used a right angle CP grinder with a 3M Scrotch Brite eon a mandrel, and went along very very carefully and just kissed the surface. __________________ Henry Ford designed the flathead without the aid of a computer.