Quote:
Originally Posted by benbuilder
I am putting this Tudor together. 1930/31.
I need to repair these pieces, left and right.
This is a picture of the driver side below the rear window at the subrail. i think it might hold the window when its in the down position? Not sure, as i bought this as a project.
Pass side is worse. Is this reproduced? I looked in the bigger catalogs but could not find them.
|
Not commercially reproduced. We generally fabricate them out of 19 gauge using a sheetmetal brake and a bead roller.
As for not finding items in the catalogs. Part of the issue that we are all guilty of is not calling specific pieces by their correct nomenclature. For example, what you are identifying as a subrail is actually the Floor Side Sill. To identify these items further, the entire assembly that holds the Window Regulator is the A-56603 Qtr. Panel Assembly - Inner. What makes this difficult is there are 3 pieces that make this an assembly, -the A-56621 Side Lining Panel - Upper and the A-56648 Qtr. Panel Lower Reinforcement