The Ford Barn - View Single Post

Bruce_MO · 11-13-2024, 05:34 PM

Rubbing on the floorboard??? I’m nearing completion of a restoration of my ‘46 Mercury, and I had issues with the clutch pedal rubbing on the floorboard when the pedal was close to the floor. I couldn’t realign the floorboard to give more clearance, so I whittled on the floorboard a bit with a hacksaw blade to open up the hole on one side. When I pushed the clutch pedal in, there was an obvious scraping sound and a noticeable drag. Not sure if you have any slop or wear in the pedal bushing. That might be contributing to your issue.

11-13-2024, 05:34 PM	#2
Bruce_MO Senior Member Join Date: May 2010 Posts: 592	Re: 47 Super Deluxe Clutch Catching Question Rubbing on the floorboard??? I’m nearing completion of a restoration of my ‘46 Mercury, and I had issues with the clutch pedal rubbing on the floorboard when the pedal was close to the floor. I couldn’t realign the floorboard to give more clearance, so I whittled on the floorboard a bit with a hacksaw blade to open up the hole on one side. When I pushed the clutch pedal in, there was an obvious scraping sound and a noticeable drag. Not sure if you have any slop or wear in the pedal bushing. That might be contributing to your issue.