The Ford Barn - View Single Post - 1948 F2 (F1 the same) door window glass replacement

mtflat · 03-11-2017, 06:12 PM

I've done several and think I did it different every time. The divider needs to be loosened and/or removed. There is a screw in the door channel at the top and nut/bolt inside the door.

I've had regulators out for refurbishing but I don't believe it is necessary to get the glass changed. Disconnect the channel from the two points and it should come down and out.

If my memory is lagging someone will be along to set us straight.

03-11-2017, 06:12 PM	#2
mtflat Senior Member Join Date: May 2010 Location: Kalispell Montana Posts: 344	Re: 1948 F2 (F1 the same) door window glass replacement I've done several and think I did it different every time. The divider needs to be loosened and/or removed. There is a screw in the door channel at the top and nut/bolt inside the door. I've had regulators out for refurbishing but I don't believe it is necessary to get the glass changed. Disconnect the channel from the two points and it should come down and out. If my memory is lagging someone will be along to set us straight.