The Ford Barn - View Single Post

Bruce in southern OH · 05-22-2015, 05:21 AM

No, it is an ignition resistor only, 6 volt to 4.5 volt to coil. Check your grounds, that is the most common problem. Add a temporary ground wire and see it that helps, then you can go to each item and clean connections.

05-22-2015, 05:21 AM	#2
Bruce in southern OH Senior Member Join Date: May 2010 Location: Proctorville Posts: 1,606	Re: 1940 ford resistor No, it is an ignition resistor only, 6 volt to 4.5 volt to coil. Check your grounds, that is the most common problem. Add a temporary ground wire and see it that helps, then you can go to each item and clean connections.