Brass GAV Seat Question
 

I have an older Zenith carb with the brass GAV seat. When I first got the car, the GAV dial inside the car would point straight up when it was fully closed. After I had a fellow club member rebuild the carb, it no longer does. It now points toward the 2 o'clock position when closed.

I found that if I screw the seat out about 3/4 turn, I can bring the dial back to the 12 o'clock position when closed. My first question is, am I being too nit picky? And my second question is, am I going to create problems by not having the seat tight? Is there a better way to line it back up or should I not worry about it?

Thanks for you help.

Re: Brass GAV Seat Question
 

he may have replaced the seat with a new one
it may be a different height
or he may have replaced the needle valve with a new one
maybe the old one was scored and worn out
ask him

Re: Brass GAV Seat Question
 

What Mot said....

Yes, yes, no, and yes.

Joe

Re: Brass GAV Seat Question
 

My GAV seats at 7 o'clock, it doesn't matter where, as long as it does.

Re: Brass GAV Seat Question
 

Well, I figured I was being too nit picky, but I like things to look right if at all possible. I guess I better screw the seat back in tight and not worry about how it looks.

Thanks for your replies.