The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Early V8 (1932-53) (https://www.fordbarn.com/forum/forumdisplay.php?f=4)
-   -   1940 column shift clip (https://www.fordbarn.com/forum/showthread.php?t=314644)

aussiesteve 06-19-2022 05:36 PM

1940 column shift clip
 

Question guys.
The clip that goes on the top of the shift tube(under the steering wheel) came off on my coupe.
The factory diagram shows a part number of 7242.
Are these available repro?
Also the diagram show something under it,part no 351341-s.
This is a washer I assume.
But is it a wave washer or flat washer?
Thanks for the help

Kube 06-19-2022 06:07 PM

Re: 1940 column shift clip
 

Quote:

Originally Posted by aussiesteve (Post 2140401)
Question guys.
The clip that goes on the top of the shift tube(under the steering wheel) came off on my coupe.
The factory diagram shows a part number of 7242.
Are these available repro?
Also the diagram show something under it,part no 351341-s.
This is a washer I assume.
But is it a wave washer or flat washer?
Thanks for the help

There is a thin wave washer beneath the circlip.
I don't believe they have ever been reproduced.
In the past, when I have needed one, I have utilized the clip that holds the brake lever to the shoe. I had to grind a bit of material from the top of the clip so it would fit the column.

aussiesteve 06-20-2022 08:08 AM

Re: 1940 column shift clip
 

Thank Kube.
I was thinking of using the brake lever clip.
I appreciate the help


All times are GMT -5. The time now is 11:17 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.