George "Skip" Haney Water pumps
 

Just got a set of rebuilt Skip water pumps. The job is professional looking and response time was great. George is certainly an asset to the flathead community. Thanks again for a great job
Bill

Re: George "Skip" Haney Water pumps
 

I second this comment. Skip also did good work on the water pumps for my '36 coupe! Scott

Re: George "Skip" Haney Water pumps
 

Four pair here. Never looked back...

Re: George "Skip" Haney Water pumps
 

i just had him rebuild a coil for my 36 truck, good service and fast turnaround!

Re: George "Skip" Haney Water pumps
 

Five coils all great......Bob

Re: George "Skip" Haney Water pumps
 

Re: George "Skip" Haney Water pumps
 

2 sets of pump and 1coil for me. Very good!!

Re: George "Skip" Haney Water pumps
 

One coil for me. It works great. Fires up as soon as I hit the switch.

Re: George "Skip" Haney Water pumps
 

If you got a flathead you gotta get his pumps. Even Henry would approve.

Re: George "Skip" Haney Water pumps
 

his pumps are the cats pajamas! :)

Re: George "Skip" Haney Water pumps
 

Can anyone provide Skip's contact information? Joe

Re: George "Skip" Haney Water pumps
 

Re: George "Skip" Haney Water pumps
 

Thanks Cecil....Joe

Re: George "Skip" Haney Water pumps
 

Skip also markets an overflow pipe valve. It keeps water from being thrown out the overflow pipe on trips, etc. My '35 was bad about getting hot, being that the water would keep getting lower, the longer I drove it. Now, with his pumps and valve, I have no heating problems at all.
MIKE :)

Re: George "Skip" Haney Water pumps
 

__________________________________________________ ______________

I just received my set of Skip Haney rebuilt '37-'48 Ford water pumps as well. I mailed these to Skip Monday before last, May 17, Priority Mail, Flat Rate Box and received them back yesterday, Monday, May 24th. He did an absolute beautiful job on these pumps. See pictures attached. And guess what......they fit my 59ab engine perfectly. No need to worry about holes not being cast or reamed correctly because they are the original 78-_ _ _ _ pn, made in the USA pump housings, and not the alternative made in China versions that are being sold by all the big, well known vendors. They will also cool the engine better than the original pumps and are guaranteed for 5 years or more. They came with two new gaskets and an instruction sheet on how/what to do to get max cooling from these high flow water pumps. What more could you ask for and where else would you get this kind of service or turn around time? If you need water pumps for your Flathead, do yourself a favor and send your old cores to Skip for a rebuild. You will not be sorry you did. JM

http://i39.photobucket.com/albums/e1...-25_143731.jpg

http://i39.photobucket.com/albums/e1...-25_143655.jpg

Re: George "Skip" Haney Water pumps
 

Got my water pumps done and rebuild distributor on my '36 last year....It doesn't get any better than Skip !!!!

Re: George "Skip" Haney Water pumps
 

He rebuilt my coil and set the rebuilt distributor I already had. Started the car for the first time last night after installing the parts and it fired right up. I'm looking forward to a summer where the car will start when it's hot.

Re: George "Skip" Haney Water pumps
 

I am 36 coupe an never used Skips water pumps.I rebuild my own with kits i bought from the Ford garage for 2 bucks each in the50s.

Re: George "Skip" Haney Water pumps
 

Hey Fellas,How much for a orig. pair rebuilt from a 8ba, would you estimate in cost? thanks Ken Nice Job, i hear he's the best!!

Re: George "Skip" Haney Water pumps
 

Just wondering if you also rebuilt the water pump on that Model A powered saw mill. that you frequently mentioned on the old Fordbarn, that always over heated? I don't think Skip rebuilds model A pumps or I would recommend sending that one to him for rebuild along with a set of your '36 pumps. JM