The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Early V8 (1932-53) (https://www.fordbarn.com/forum/forumdisplay.php?f=4)
-   -   '46 Business Coupe Package Tray (https://www.fordbarn.com/forum/showthread.php?t=265719)

Wat-0 07-01-2019 11:05 AM

'46 Business Coupe Package Tray
 

I have a '46 Business Coupe that is missing the package tray and I would like to replicate one. Are there any photos, dimensions available or is someone offering a kit? Thanks!

meric42 07-01-2019 03:32 PM

Re: '46 Business Coupe Package Tray
 

1 Attachment(s)
Here's a picture of my '41 Business Coupe tray. I can take some more pictures and measurements for you if needed but won't be for a week or so as it is currently stored at my fiance's mothers garage. Let me know and I will do what I can :)

Wat-0 07-01-2019 08:15 PM

Re: '46 Business Coupe Package Tray
 

meric42, I very much appreciate your speedy reply and offer to help! I would very much appreciate any additional photos and measurements you can provide. If possible I would also like to see photos of your seat and how the back that lifts up is upholstered. Just when you have time! Thanks again!

meric42 07-01-2019 09:00 PM

Re: '46 Business Coupe Package Tray
 

I will get to the coupe and take soon pic's as soon as I can for you. Mine has an old seat cover protecting it so you may not see a lot of the original upholstery but '41 is quite different in the fabric to '46.

tetanus 07-02-2019 09:11 AM

Re: '46 Business Coupe Package Tray
 

i have the tray and also a drawing i got before i found mine. i will be in and out next few weeks but after that i can help you out. pm me after july 14 too remind me. i can help you with it.

Wat-0 07-02-2019 09:49 AM

Re: '46 Business Coupe Package Tray
 

Tetanus, I will be in contact and very much appreciate anything you can provide. I'm trying to find out as much as I can before diving in.

tetanus 07-17-2019 12:16 PM

Re: '46 Business Coupe Package Tray
 

2 Attachment(s)
here is the drawing i got from a guy that i met in iola wi car show years ago.

Wat-0 07-17-2019 01:27 PM

Re: '46 Business Coupe Package Tray
 

tetanus, great information, thanks for sharing as this is just what I needed!

tetanus 08-19-2019 09:10 AM

Re: '46 Business Coupe Package Tray
 

5 Attachment(s)
here is some pics

tetanus 08-19-2019 09:12 AM

Re: '46 Business Coupe Package Tray
 

1 Attachment(s)
one more

tetanus 08-19-2019 09:13 AM

Re: '46 Business Coupe Package Tray
 

and the dimension from front to back of shelf is 22 5/8 it is not on drawing

Wat-0 08-19-2019 10:03 AM

Re: '46 Business Coupe Package Tray
 

Mike, thank you very much for all the help in getting me this information! I'm on the right track now with the info you have provided.

SHORTDOOR 02-23-2026 07:50 PM

Re: '46 Business Coupe Package Tray
 

I have been searching for this missing link for my 46 for some time. Thank you to tetanus for the details.

tetanus 02-26-2026 01:18 PM

Re: '46 Business Coupe Package Tray
 

shortdoor, i looked for a few years for one. then i found guy that sent me drawing. then a few years after that talking to a guy at swap 2 hrs away said he had seat and tray. He lived about 10 miles from me! you do know the seats are different than the 5 pass coupe. the back flips up from bottom to get behind/under shelf

SHORTDOOR 02-27-2026 10:04 AM

Re: '46 Business Coupe Package Tray
 

Yes, I have the flip up seat back. In fact, it is already upholstered. All work on this car was stopped in 1992. That man had bought everything for this car. He then went to a "restorer" to get the work done. We all know how that goes. My friend traded a snowmobile for it and never touched it. I got it in 2006 and had to remove the body from the frame to sandblast and paint everything. Time marches on and I am finally going to get paint on it this spring. I have been driving it up and down the road sitting on a milk crate. So, while it is still cold, I have been wiring and looking at this package shelf. I am going to use hard wood 1/2-inch plywood and a 3/4-inch hardwood piece at the front. I have all the covering from the LeBaron Bonney kit that was purchased in 1991. It is a Super Deluxe so grey covering. I believe 1947 and 1948 were Deluxe, hence the brown covering.

SHORTDOOR 03-11-2026 07:22 PM

Re: '46 Business Coupe Package Tray
 

1 Attachment(s)
Instead of painting or wrenching, I wood worked today. I think my father would have approved of my work using his table saw and drill press. Under structure of the package shelf is complete with the Ford Barn's help. Thank you!

1942deluxe 03-11-2026 08:17 PM

Re: '46 Business Coupe Package Tray
 

1 Attachment(s)
Attachment 582689
Here is the package tray we made for my 42 3 passenger coupe. Didn't have a drawing with dimensions so a lot of time making a template out of cardboard.

1942deluxe 03-11-2026 08:22 PM

Re: '46 Business Coupe Package Tray
 

1 Attachment(s)
Attachment 582690
Not a perfect fit but presentable.

petehoovie 03-12-2026 12:47 AM

Re: '46 Business Coupe Package Tray
 

Quote:

Originally Posted by SHORTDOOR (Post 2441919)
Instead of painting or wrenching, I wood worked today. I think my father would have approved of my work using his table saw and drill press. Under structure of the package shelf is complete with the Ford Barn's help. Thank you!

https://www.fordbarn.com/forum/attac...8&d=1773274842

petehoovie 03-12-2026 12:47 AM

Re: '46 Business Coupe Package Tray
 

Quote:

Originally Posted by 1942deluxe (Post 2441920)
Attachment 582689
Here is the package tray we made for my 42 3 passenger coupe. Didn't have a drawing with dimensions so a lot of time making a template out of cardboard.

https://www.fordbarn.com/forum/attac...9&d=1773278073


All times are GMT -5. The time now is 11:18 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.