The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Model A (1928-31) (https://www.fordbarn.com/forum/forumdisplay.php?f=3)
-   -   SW sedan crossmember hole cover (https://www.fordbarn.com/forum/showthread.php?t=250146)

duke36 08-23-2018 09:52 PM
SW sedan crossmember hole cover
 

1 Attachment(s)
Some posts questioned the rear cross member hole cover. Attached is a photo of what appears to be an after market metal cover. The holes are also in the pan for the fabric cover straps.

Ed Saniewski 08-24-2018 05:28 AM
Re: SW sedan crossmember hole cover
 

That takes a few pressings to make. Fords way was much cheaper using left over upholstery material.

Scott NY 08-24-2018 07:47 AM
Re: SW sedan crossmember hole cover
 

1 Attachment(s)
My original s/w has a fabric cover. Hopefully the picture is attached

Dave in MN 08-24-2018 08:27 AM
Re: SW sedan crossmember hole cover
 

Somewhat off topic but...
I recently removed the fabric crossmember cover on a '31 Slant Windshield to replace a rear spring u-bolt because of a stripped thread.
It would have been ugly if it had a riveted cover!
Good Day!

jw hash 08-24-2018 09:00 PM
Re: SW sedan crossmember hole cover
 

duke if you install a metal cover over the hole, your seat spring bottom will be ridding right on it. installing a fabric one is easy.

duke36 08-25-2018 08:03 PM
Re: SW sedan crossmember hole cover
 

Quote:
Originally Posted by jw hash (Post 1667100)
duke if you install a metal cover over the hole, your seat spring bottom will be ridding right on it. installing a fabric one is easy.
Car came with cover, no issues with seat bottom. Have insulation on top of pan.


All times are GMT -5. The time now is 10:17 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.