![]() |
Looking for a little info 49 Pickup I'm looking to add some company for my 30 coupe, and have takin' a liking to a 49 1/2 ton. Are the seats adjustable? Leg room for 6ft 2?
|
Re: Looking for a little info 49 Pickup I've got the same truck basically. The seat does slide.
Mine is all the way back against the gas tank. I'm 5'8" and it's comfortable. The guy I got it from was around 6' 2" or so and he was comfortable. If you wanted a bit more legroom than having the seat all the way back, you'd probably have to delete the gas tank and move it to under the bed. Headroom may or may not be an issue. I have about 6" to the headliner. |
Re: Looking for a little info 49 Pickup I'm 6'4", and I was comfortable.
|
Re: Looking for a little info 49 Pickup This is not specific to the 49 but old pick-ups in general, the seat back is too vertical and the angle is made worse by sliding the seat bottom aft. It may affect your comfort level.
|
Re: Looking for a little info 49 Pickup Thanks all.
|
Re: Looking for a little info 49 Pickup Quote:
|
Re: Looking for a little info 49 Pickup You can't have them all Benny. 8^)
|
Re: Looking for a little info 49 Pickup Quote:
I am 6'-0" and things are a little tight in my 41. I agree with the comment about the seat and find the size of the steering wheel is also a factor. |
Re: Looking for a little info 49 Pickup 2 Attachment(s)
some pics
|
Re: Looking for a little info 49 Pickup Quote:
|
Re: Looking for a little info 49 Pickup While many have made the tank swap for 'more' seat room, I'm not convinced on the value. Considering that the stock seat is fairly vertical and already uses every bit of the avaiable cab space, changing might shift the geometry but can't create new space. I'm 6'2" and don't have any head or confort issues. Your fit may vary.
On the sites, take a look at the 48-56 forum at Ford Truck Enthusiasts (ford-trucks.com). Good group, very accepting, and active. |
Re: Looking for a little info 49 Pickup I'm on Ford Truck Enthusiasts occasionally. I don't
think it's as good as this forum, even though there isn't a dedicated F-1 section here. The first time I saw that bed tank design it was in the Classic Haulers catalog...... They're now pretty much handled by Mid-Fifties. http://midfifty.com/item.php?INV_ID=...ectangle--door There's a few variations out there on this theme, including one where a section of the bed panel flips up, allowing access to the gas fill neck, etc. I can't direct you exactly because it's not on my "pending projects" list, but some pretty clever stuff is available. |
Re: Looking for a little info 49 Pickup http://www.fordbarn.com/forum/attach...p;d=1488137802
Nice looking 1949 Pick-up. |
Re: Looking for a little info 49 Pickup Droool!
|
Re: Looking for a little info 49 Pickup There is a 48-49-50-51 52 F-1 thru F-8 page on Facebook
|
Re: Looking for a little info 49 Pickup Quote:
https://www.facebook.com/VintageFordTruckClub/ |
Re: Looking for a little info 49 Pickup I'm 6' even and with the seat fully back on my '49 I'm comfortable, but the bigger problem is that the gas pedal is too vertical so I end up just operating it with my toe.
|
Re: Looking for a little info 49 Pickup Quote:
|
Re: Looking for a little info 49 Pickup There are a few of us here that focus on trucks. In my opinion, you'll get better info here than some other forums because there you have to sort out the real stuff from the junk that gets posted by guys who are in competition for post counts.
You got honest info on this thread... Just beware, you buy one and others will follow it home! ;) |
Re: Looking for a little info 49 Pickup So then, where are the normal rust-out spots to look for?
|
| All times are GMT -5. The time now is 07:12 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.