The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Early V8 (1932-53) (https://www.fordbarn.com/forum/forumdisplay.php?f=4)
-   -   32 roadster windshield seal (https://www.fordbarn.com/forum/showthread.php?t=208807)

Floyd 11-09-2016 01:21 PM

32 roadster windshield seal
 

Simple question. Does the rubber seal at the bottom of the windshield frame lay against the outside of the ridge on the cowl or up against the inside ledge? Pictures I have seen are not clear. Inside looks better, outside allows opening windshield.
Thanks

DavidG 11-09-2016 01:30 PM

Re: 32 roadster windshield seal
 

Outside of the ridge as the windshield was designed to open. Further, if the rubber weatherstrip were located inside of the ridge it would be useless in preventing water intrusion while driving in the rain.

woodiewagon46 11-09-2016 01:43 PM

Re: 32 roadster windshield seal
 

As wind and rain press against it it helps make the seal.


All times are GMT -5. The time now is 05:30 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.