Passenger window metal rail When installing the glass in rear doors I found the riser arms popping out of the metal channel on the bottom of glass. Can I just get a wood block and tap this metal channel about 1" left or right OR is there another/correct way to move this without breaking glass. Thanks
|
Re: Passenger window metal rail You could tap it left or right, but keep in mind that the glass channel setting tape may not move with the channel.
|
Re: Passenger window metal rail Thanks, I had the same concern. May just wait till Mond and let glass co. that cut my glass reinstall the piece.
|
All times are GMT -5. The time now is 04:54 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.