The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Model A (1928-31) (https://www.fordbarn.com/forum/forumdisplay.php?f=3)
-   -   Front Brake Lever Pins (https://www.fordbarn.com/forum/showthread.php?t=102799)

Charles Reese 04-08-2013 09:09 PM

Front Brake Lever Pins
 

what is the 'OD' of A2085 Front Brake Lever Pins? Thanks!

Milton 04-09-2013 12:01 AM

Re: Front Brake Lever Pins
 

1/4" if I am reading Les Andrews Vol I page 1-32 correctly. Brattons says the same 2013 catalog page 12.

Charles Reese 04-09-2013 12:12 AM

Re: Front Brake Lever Pins
 

Thanks ... i was using Snyder's for # reference since Brattons does not use Ford #s.

d.j. moordigian 04-09-2013 09:38 AM

Re: Front Brake Lever Pins
 

Well....I couldn't find "A-2085" in the PPL's that I have.

Is this the clevis pin for the brake rods? If "yes", then it is .3125" or 5/16".

Dudley

* OK...just had some Coffee.....I'm not sure what size the pin is that holds the
arm too the shaft...*

Tom Wesenberg 04-09-2013 03:40 PM

Re: Front Brake Lever Pins
 

The closest I can find is:

A-2084 Front Brake Lever........
Front Brake Lever Pin.........Order A-23766.......

A-23766.......1/4 x 15/16 flat head pin...............


All times are GMT -5. The time now is 11:17 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.