The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Early V8 (1932-53) (https://www.fordbarn.com/forum/forumdisplay.php?f=4)
-   -   Need a new or rebuilt 1951 ford 6 cylinder water pump (https://www.fordbarn.com/forum/showthread.php?t=296177)

throwback 03-21-2021 05:08 PM

Need a new or rebuilt 1951 ford 6 cylinder water pump
 

Can anyone tell me where I can get a new or rebuilt 6 cylinder Water pump for a 1951 Ford Custom 6 cylinder engine?

Thank You!

FortyNiner 03-21-2021 05:36 PM

Re: Need a new or rebuilt 1951 ford 6 cylinder water pump
 

Is it the 226 I6?

throwback 03-21-2021 05:39 PM

Re: Need a new or rebuilt 1951 ford 6 cylinder water pump
 

It is a straight 6 cylinder. I assume it is a 226.

cmbrucew 03-21-2021 05:42 PM

Re: Need a new or rebuilt 1951 ford 6 cylinder water pump
 

Rare to find one. I bought a small rebuilt waterpump with the same size shaft (diaXlength) and put the new shaft,bearings and seal into my housing. Don't break your

pulley or impeller. Small press is handy.
Skip may rebuild your Pump for you.
Bruce

KiWinUS 03-21-2021 06:18 PM

Re: Need a new or rebuilt 1951 ford 6 cylinder water pump
 

The auction site and very expensive.

51 MERC-CT 03-21-2021 06:25 PM

Re: Need a new or rebuilt 1951 ford 6 cylinder water pump
 

Check Advance Auto Parts

throwback 03-21-2021 07:48 PM

Re: Need a new or rebuilt 1951 ford 6 cylinder water pump
 

Thank You!!

FortyNiner 03-21-2021 09:43 PM

Re: Need a new or rebuilt 1951 ford 6 cylinder water pump
 

The 226 water pumps are not reproduced and need to be rebuilt using your core. They are tricky to rebuild for the casual mechanic without a proper press. Best bet is to go to a known rebuilder. A number of members on FTE have used Cowboy John in Florida with good results. I've got a backup unit ready to head his way.

You'll want to be very careful with the thermostat housing as they are prone to cracking and are also not reproduced.

https://cowboyjohnsautoparts.com/

GB SISSON 03-21-2021 10:03 PM

Re: Need a new or rebuilt 1951 ford 6 cylinder water pump
 

I had a guy in Oregon rebuild a studebaker flathead six pump about two years ago. Of course I didn't save the receipt or info. He only rebuilds waterpumps. There was something in his business name about a 'Dutchman'

throwback 03-29-2021 09:57 PM

Re: Need a new or rebuilt 1951 ford 6 cylinder water pump
 

I sent it to Skip Haney in Florida for rebuild.

Thanks!

cubflyer 03-30-2021 07:58 AM

Re: Need a new or rebuilt 1951 ford 6 cylinder water pump
 

I have a complete engine run a bowl sitting in the stand if you’re interested also J and I in Marshfield rebuilds Pumps

cubflyer 03-30-2021 08:06 AM

Re: Need a new or rebuilt 1951 ford 6 cylinder water pump
 

Complete engine 250 J&i 18004682439 4174682439 good people do starters and alternators and generators

amodel25 04-07-2021 02:31 PM

Re: Need a new or rebuilt 1951 ford 6 cylinder water pump
 

Kanter Auto Parts lists them.


All times are GMT -5. The time now is 08:18 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.