41 ford choke & Throttle Rod rubber connections What is the best way to attach the new rubber
Connections to the existing rods. The originals Are crimped on. I've cut those off and am thinking about using epoxy Thoughts? |
Re: 41 ford choke & Throttle Rod rubber connections I have a buddy that used JB on them. Looks stock and works well.
I used a hydraulic cable crimper for some yacht wire balustrading I did a while back. Worked well but left hex crimp marks on the joints if thats a worry for you. |
Re: 41 ford choke & Throttle Rod rubber connections Thks unfortunately I don't have one. Of those the side that connects 1to the carburator arm I did in a vise 1 and it should be fine it's the side on the cable side I'm debating best approach
|
Re: 41 ford choke & Throttle Rod rubber connections The JB my buddy did on his car looks great
|
All times are GMT -5. The time now is 11:59 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.