Early 21 inch wheel vs later 21 inch wheel How can you tell if 21 inch wheel is the early ( AR) type or the later type? Can someone give me the width of the inner centre for the two types ?
|
Re: Early 21 inch wheel vs later 21 inch wheel The bead outside of the lugnut holes is about 3/8 " on the later wheel .
on the early wheel it is about an inch. Sorry I don't have an early wheel to measure The AR used the same brake drums on the front and back The AR front drum does not have a collar that goes right up to the bearing cone on the hub, instead it finishes about 2" from the center of the bearing cone I hope this helps Easy to spot the difference when you know what to look for |
Re: Early 21 inch wheel vs later 21 inch wheel The hub depth on an early wheel is an inch, and later wheels are about an inch and a half.
|
Re: Early 21 inch wheel vs later 21 inch wheel Suggest you refer to the Service Bulletins; you do not want to put AR wheels on "B" drums or "B" wheels on AR drums.
Ron |
Re: Early 21 inch wheel vs later 21 inch wheel Quote:
|
Re: Early 21 inch wheel vs later 21 inch wheel Mix ups can cause inner wheel center hub cracks!!!
Bill Mixedup |
Re: Early 21 inch wheel vs later 21 inch wheel 1 Attachment(s)
|
Re: Early 21 inch wheel vs later 21 inch wheel 3 Attachment(s)
Hi John,
I posted three photos. The first is an AR rim and the next two are the later type. |
All times are GMT -5. The time now is 06:22 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.