Exhaust/Intake gasket
 

I have used a black fiber 1 piece gasket in past with excellent results. Don't remember where I purchased. Does anyone know of a supplier? If not, what is best product currently on market. Thanks. a31vicky

Re: Exhaust/Intake gasket
 

I've only used the copper with filler in the center and had excellent results. I also use the gland rings, except due to slight warpage I can't get the rear one in my 28.

Re: Exhaust/Intake gasket
 

i use the copper also and usually replace the studs and manifold dish washers and brass nuts. it gives it a clean fresh look