The Ford Barn

David W Juliano · 06-16-2015, 07:46 AM

I have a Hurd 1938-48 ignition lock in search of a key. I have the key blanks and the ignition key code but no one in my area has the old Ford key code books or can cut a key by code. There must be someone in the hobby that can still cut a key. Any help will be appreciated. Thanks

Benson · 06-16-2015, 09:29 AM

Have you tried the early V8 website?

http://www.fordbarn.com/forum/forumdisplay.php?f=4

Bruce_MO · 06-16-2015, 01:01 PM

Yes... post this on the V-8 Forum, and if you don't get a response, PM me. There are a couple V8 folks who can help you. Good luck

Benson · 06-16-2015, 02:31 PM

I called the local old time locksmith here and he says he can cut some of them ... needs to see them though.

Maybe if you email photos he can help.

Double A Security, Inc
Steve Melka

303-232-LOCK (5625)

email: [email protected]

C26Pinelake · 06-16-2015, 09:04 PM

Google " The Key Man " He cut me a key by seeing a photograph of the ignition switch. Cost was $ 50 dollars shipped. Wayne

mrtexas · 06-17-2015, 12:18 PM

Sponsored Links (Register now to hide all advertisements)

I cut him two keys on approval for $6

C26Pinelake · 06-17-2015, 12:29 PM

Sure wish you had been around two months ago when I posed the question ! If I give you the key number can you cut me 4 for $12 plus shipping ? It is a 1923 Cardway. Wayne

06-16-2015, 07:46 AM	#1
David W Juliano Member Join Date: May 2010 Posts: 30	ignition key I have a Hurd 1938-48 ignition lock in search of a key. I have the key blanks and the ignition key code but no one in my area has the old Ford key code books or can cut a key by code. There must be someone in the hobby that can still cut a key. Any help will be appreciated. Thanks

06-16-2015, 09:29 AM	#2
Benson Senior Member Join Date: May 2010 Posts: 2,609	Re: ignition key Have you tried the early V8 website? http://www.fordbarn.com/forum/forumdisplay.php?f=4

06-16-2015, 01:01 PM	#3
Bruce_MO Senior Member Join Date: May 2010 Posts: 435	Re: ignition key Yes... post this on the V-8 Forum, and if you don't get a response, PM me. There are a couple V8 folks who can help you. Good luck

06-16-2015, 02:31 PM	#4
Benson Senior Member Join Date: May 2010 Posts: 2,609	Re: ignition key I called the local old time locksmith here and he says he can cut some of them ... needs to see them though. Maybe if you email photos he can help. Double A Security, Inc Steve Melka 303-232-LOCK (5625) email: [email protected] Last edited by Benson; 06-16-2015 at 06:52 PM.

06-16-2015, 09:04 PM	#5
C26Pinelake BANNED Join Date: May 2010 Location: Michigan / Ontario border, Sarnia, Ontario. 50 miles from Detroit and 150 from Toronto. Posts: 5,800	Re: ignition key Google " The Key Man " He cut me a key by seeing a photograph of the ignition switch. Cost was $ 50 dollars shipped. Wayne

06-17-2015, 12:18 PM	#6
mrtexas Senior Member Join Date: May 2010 Location: Sugar Land, TX Posts: 4,395	Re: ignition key Sponsored Links (Register now to hide all advertisements) I cut him two keys on approval for $6

06-17-2015, 12:29 PM	#7
C26Pinelake BANNED Join Date: May 2010 Location: Michigan / Ontario border, Sarnia, Ontario. 50 miles from Detroit and 150 from Toronto. Posts: 5,800	Re: ignition key Sure wish you had been around two months ago when I posed the question ! If I give you the key number can you cut me 4 for $12 plus shipping ? It is a 1923 Cardway. Wayne