|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
03-24-2014, 02:55 PM | #1 |
Junior Member
Join Date: Nov 2011
Location: Pasadena, MD
Posts: 18
|
Model A Update!
|
03-24-2014, 03:02 PM | #2 |
Senior Member
Join Date: May 2010
Location: Portland, Oregon
Posts: 5,920
|
Re: Model A Update!
That's a great chronicle! Thanks for sharing!
__________________
Ray Horton, Portland, OR As you go through life, keep your eye on the donut, not the hole. |
Sponsored Links (Register now to hide all advertisements) |
|
03-24-2014, 03:14 PM | #3 |
Senior Member
Join Date: May 2010
Location: So Cal
Posts: 8,792
|
Re: Model A Update!
Looks great. I think the pins for the emergency brake are in backwards.
Bob |
03-24-2014, 07:20 PM | #4 |
Member
Join Date: Sep 2013
Location: Roseville,Michigan
Posts: 92
|
Re: Model A Update!
Awsome pics. Good job
|
07-23-2014, 06:58 AM | #5 |
Junior Member
Join Date: Nov 2011
Location: Pasadena, MD
Posts: 18
|
Re: Model A Update!
|
07-23-2014, 07:02 AM | #6 |
Junior Member
Join Date: Nov 2011
Location: Pasadena, MD
Posts: 18
|
Re: Model A Update!
|
07-23-2014, 07:35 AM | #7 |
Senior Member
Join Date: May 2010
Location: Mpls, MN
Posts: 27,582
|
Re: Model A Update!
Nice pictures and I'm glad you posted them. You should remove the rear drums and correct the springs holding the parking brake bands. Your picture shows the springs in the closest holes to the support carrier, and they belong in the outside holes. I made the same mistake years ago, and I also discovered it when I looked at a picture I took of the brakes.
With the springs hooked in the close holes on the band, the spring ends can catch on the carrier and cause problems. |
07-23-2014, 05:23 PM | #8 | |
Senior Member
Join Date: Dec 2010
Location: FRESNO, CA
Posts: 12,560
|
Re: Model A Update!
Quote:
Buster T.
__________________
"THE ASSISTANT GURU OF STUFF" |
|
07-23-2014, 06:00 PM | #9 |
Senior Member
Join Date: May 2010
Location: So Cal
Posts: 8,792
|
Re: Model A Update!
Your right Bill I don't know what I was thinking. It would have been better to
say nothing that way if the pins stick out to far and rub on the hub he can take it apart later and turn them around. Bob |
07-23-2014, 06:50 PM | #10 |
Member
Join Date: Nov 2012
Location: D/FW, TX
Posts: 74
|
Re: Model A Update!
Very nice organization on the website.
I think I saw your first video on youtube awhile ago, nice to see how far it's coming. Good catches Bob and Tom W.! Last edited by 29tudorsedan; 07-23-2014 at 06:51 PM. Reason: Clarification of Tom's. |
|
|
Sponsored Links (Register now to hide all advertisements) |
|