The Ford Barn

SamIyam · 01-11-2011, 01:20 PM

Good morning all!

Just a quick question...

I have been searching the net, high and low... for some specs on the Model B four cylinder engine.

Funny... but you think it would be pretty easy to find that stuff with all this technology, and all.

Nope, nothing.

What I would like to know is:

Bore diameter

Stroke

Crankshaft main journal size

Crankshaft rod journal size

I appreciate your help!

Sam

just plain bill · 01-11-2011, 03:15 PM

Quote:

Originally Posted by SamIyam

Good morning all!

Just a quick question...

I have been searching the net, high and low... for some specs on the Model B four cylinder engine.

Funny... but you think it would be pretty easy to find that stuff with all this technology, and all.

Nope, nothing.

What I would like to know is:

Bore diameter

Stroke

Crankshaft main journal size

Crankshaft rod journal size

I appreciate your help!

Sam

Bore and stroke same as "A" "B" mains 2" rods 1 7/8"

Manuel · 01-11-2011, 11:48 PM

What info are u after Sam?
Please ask

Manuel in Oz

Cajun · 01-12-2011, 08:18 AM

Some information.

http://www.modelaengine.com/02.html

http://www.fordgarage.com/

Kohnke Rebabbitting · 01-12-2011, 08:49 PM

Quote:

Originally Posted by SamIyam

Good morning all!

Just a quick question...

I have been searching the net, high and low... for some specs on the Model B four cylinder engine.

Funny... but you think it would be pretty easy to find that stuff with all this technology, and all.

Nope, nothing.

What I would like to know is:

Bore diameter

Stroke

Crankshaft main journal size

Crankshaft rod journal size

I appreciate your help!

Sam

Bore 3-7/8's

Stroke 4-1/4

Main shaft Size 1.9980 to 1.9990

Rod Shaft size 1.8720 to 1.8730

Rod Hole Size 1.8750

SamIyam · 01-18-2011, 02:22 AM

Sponsored Links (Register now to hide all advertisements)

So the size of the crank is 1-2 thou smaller for clearance...

Rods 2-3 thou?

Sam

01-11-2011, 01:20 PM	#1
SamIyam Member Join Date: May 2010 Location: 45 minutes East of Frisco Posts: 43	Model B four cylinder engine info needed! Good morning all! Just a quick question... I have been searching the net, high and low... for some specs on the Model B four cylinder engine. Funny... but you think it would be pretty easy to find that stuff with all this technology, and all. Nope, nothing. What I would like to know is: Bore diameter Stroke Crankshaft main journal size Crankshaft rod journal size I appreciate your help! Sam __________________ signature edited by moderator... because it was too dang funny!

01-11-2011, 11:48 PM	#3
Manuel Senior Member Join Date: May 2010 Location: ACT Australia Posts: 507	Re: Model B four cylinder engine info needed! What info are u after Sam? Please ask Manuel in Oz

01-12-2011, 08:18 AM	#4
Cajun Senior Member Join Date: May 2010 Location: Plano, Texas Posts: 104	Re: Model B four cylinder engine info needed! Some information. http://www.modelaengine.com/02.html http://www.fordgarage.com/

01-18-2011, 02:22 AM	#6
SamIyam Member Join Date: May 2010 Location: 45 minutes East of Frisco Posts: 43	Re: Model B four cylinder engine info needed! Sponsored Links (Register now to hide all advertisements) So the size of the crank is 1-2 thou smaller for clearance... Rods 2-3 thou? Sam __________________ signature edited by moderator... because it was too dang funny!