Motor Mounts (front and Rear) Finish

[sethkestenbaum]

What is the correct finish for the front and rear motor mounts? I'm in the process of sanding/brushing the originals on my 1929 and would like to use the proper finish. I'm assuming Black enamel satin, semi-gloss or gloss is "correct". While we are at it, what about the frame and cross member U bolts? I have the judging standards, but they appear vague on finishes on a bunch of things.

[2manycars]

mounts were probably dipped in black enamel at the factory, so probably gloss black.

[msmaron]

Sponsored Links (Register now to hide all advertisements)

Originally Posted by sethkestenbaum

What is the correct finish for the front and rear motor mounts? I'm in the process of sanding/brushing the originals on my 1929 and would like to use the proper finish. I'm assuming Black enamel satin, semi-gloss or gloss is "correct". While we are at it, what about the frame and cross member U bolts? I have the judging standards, but they appear vague on finishes on a bunch of things.

Please go to the section 4 of your Standards and on the back page you will find the finishes you need, Good Luck