Original 1932 Ford Ignition and Column Lock

[Ken Zanelli]

Probably won’t find another original nicer.
Appears to have original paint, everything works fine.
Did not lube or polish anything just wiped it down with windex.
Rubber gasket at column is soft and pliable.
Has 2 keys - One says ‘HURD’ which I believe is original.
Original Column was cut 3 3/4” below the lock mech. -
so it’s easy to adapt to your existing column.
Top of column piece has original rubber gasket sleeve holding
a 1” long insert hard fiber inset to hold your 3/4” steel column shaft.
Total cut down column length is 11” long x 1 1/2” dia. O.D.
No visible rust to be seen. All correct bolts I believe -
no visible cracks on backelite piece on bottom.
JUST A SUPER NICE PIECE and correct for 32.
Priced accordingly. Not reproduced to my knowledge.
Pretty sure this will go fast. - $385.

Pictures tell the story - If need more pics or info let me know.
Interested - email me.

[Ken Zanelli]

Sponsored Links (Register now to hide all advertisements)

Sold