Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 08-06-2014, 02:40 PM   #1
gnormoyle
Junior Member
 
Join Date: Dec 2011
Location: FResno
Posts: 12
Default Brassworks Radiator

We drove over to the Brassworks factory in Paso Robles on Monday to pick up a new radiator for my 29 open cab PU. Got it installed and just came back from a test run. It is a typical Fresno summer day, 85F. The highest water temp for the Ford was 150F (according to the temp gauge). Before, with the old radiator, the temp would run 190-200F and I could not sustain a 10 minute run at 45mph without the temp going over 212F.

We took the old grill shell over to be sure of a fit, but I got the whole thing installed without any significant fit issues. They also do the overflow tube according to the Ford Service Bulletin, so no more roofing nail in the tube. In addition, they also have the hood rest on the side of the radiator like the originals.

I bought the higher efficiency radiator as opposed to the exact replica, it was less expensive($595) and I couldn't be happier with the cooling capability. This radiator runs at least 40 degrees cooler than with the old one.
gnormoyle is offline   Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 02:16 AM.