01-13-2022, 02:05 AM | #1 |
Senior Member
Join Date: Jan 2014
Location: Orcas Island Washington
Posts: 4,844
|
Moog kingpins
I thought I would start a new thread about these American made kingpins for our old Fords. I have been piggybacking (or hijacking)on an older king pin puller thread, but the parts I just received deserve more than that. Moog is a suspension company of good repute. The old bushings I pressed out were a split bushing but these are a full circle type. Lots of bronze to hone before you get to the steel. Even the thrust bearings are American made. The bushings came wrapped in oiled waxed paper and they pressed into place nicely with my trusty old wilton vice. I already honed one spindle but when my son shows up to work tomorrow I hope to do a short video of the process and the pin dropping slowly under it's own weight. About 63 bucks on amazon, free shipping.
__________________
Owner/Operator of 'Jailbar Ranch' on the side of Mt. Pickett. Current stable consists of 1946 1/2 ton pickup turned woodie wagon with FH V8, 1947 Tonner Pickup (red) mostly stock with exception of a cummins 6at turbo diesel, 1946 Tonner Pickup (green) with 226 cu in 6 cyl flathead, 1979 Toyota landcruiser wagon, completely encased in 1947 Ford Jailbar sheet metal. Ok, cornbinder rear fenders..... 'Rusty ol' floorboards, hot on their feet' (Alan Jackson) |
01-13-2022, 06:59 AM | #2 |
Senior Member
Join Date: Feb 2017
Location: quebec canada
Posts: 148
|
Re: Moog kingpins
nice gary ! are the pins hollow,the set i used was hollow. seems to me it weakins the pin .
|
Sponsored Links (Register now to hide all advertisements) |
|
01-13-2022, 09:48 AM | #3 |
Senior Member
Join Date: Jul 2010
Location: 36 miles north of Albany NY
Posts: 2,931
|
Re: Moog kingpins
Thanks for the update, what vehicle are they going in.
|
01-13-2022, 11:06 AM | #4 |
Senior Member
Join Date: May 2010
Location: East Shore of LAKE HOUSTON
Posts: 11,106
|
Re: Moog kingpins
.
That is one nice-looking bushing! DD |
01-13-2022, 11:39 AM | #5 |
Senior Member
Join Date: Jan 2014
Location: Orcas Island Washington
Posts: 4,844
|
Re: Moog kingpins
They are going into yet another jailbar tonner. This truck is getting a mechanical overhaul. It will have a low mileage H six and a T-9 four speed. These kingpins are not hollow, seems an odd place to save steel. Looks like this same set works for cars and 1/2 tons too. The 1 1/2 tons use a larger set.
__________________
Owner/Operator of 'Jailbar Ranch' on the side of Mt. Pickett. Current stable consists of 1946 1/2 ton pickup turned woodie wagon with FH V8, 1947 Tonner Pickup (red) mostly stock with exception of a cummins 6at turbo diesel, 1946 Tonner Pickup (green) with 226 cu in 6 cyl flathead, 1979 Toyota landcruiser wagon, completely encased in 1947 Ford Jailbar sheet metal. Ok, cornbinder rear fenders..... 'Rusty ol' floorboards, hot on their feet' (Alan Jackson) |
01-13-2022, 11:50 AM | #6 |
Senior Member
Join Date: Oct 2011
Location: Shelton, WA
Posts: 3,777
|
Re: Moog kingpins
Sponsored Links (Register now to hide all advertisements)
|
01-13-2022, 12:34 PM | #7 |
Senior Member
Join Date: Jan 2014
Location: Orcas Island Washington
Posts: 4,844
|
Re: Moog kingpins with short video
In the past I have always sourced NORS and all the old USA parts have been nice quality. I was already buying some stuff on amazon, and decided to give these a try. I haven't gotten the spinning spoon video yet but I posted last night's video. It is just a bit longer than a minute.
https://youtu.be/4MfZYZJSPQ8
__________________
Owner/Operator of 'Jailbar Ranch' on the side of Mt. Pickett. Current stable consists of 1946 1/2 ton pickup turned woodie wagon with FH V8, 1947 Tonner Pickup (red) mostly stock with exception of a cummins 6at turbo diesel, 1946 Tonner Pickup (green) with 226 cu in 6 cyl flathead, 1979 Toyota landcruiser wagon, completely encased in 1947 Ford Jailbar sheet metal. Ok, cornbinder rear fenders..... 'Rusty ol' floorboards, hot on their feet' (Alan Jackson) |
01-13-2022, 02:39 PM | #8 |
Senior Member
Join Date: Jan 2012
Location: Lyman,ME.
Posts: 2,612
|
Re: Moog kingpins
Well Gary, I’m glad there’s no Tomfoolery or Big time trickery coming out of your shop !!…..I never thought there would be !!…..I looked quick on Amazon and couldn’t find kingpins listed … can you share the link to where you found them ?….. Mark
__________________
I'm thinkin' about crankin' My ragged ol' truck up and haulin' myself into town. Billy Joe Shaver |
01-13-2022, 02:57 PM | #9 |
Senior Member
Join Date: May 2010
Location: So Cal
Posts: 8,711
|
Re: Moog kingpins
|
01-13-2022, 08:27 PM | #10 |
Senior Member
Join Date: Jan 2012
Location: Lyman,ME.
Posts: 2,612
|
Re: Moog kingpins
Thanks Bob......Mark
__________________
I'm thinkin' about crankin' My ragged ol' truck up and haulin' myself into town. Billy Joe Shaver |
01-13-2022, 09:20 PM | #11 |
Senior Member
Join Date: Jan 2014
Location: Orcas Island Washington
Posts: 4,844
|
Re: Moog kingpins
My son took the spinning spoon video. I will post it to youtube. Really, you mechanical types already get how it's done... But maybe someday a chevy stovebolt guy will want to know how he can hone his kingpins and there, he will have it!
__________________
Owner/Operator of 'Jailbar Ranch' on the side of Mt. Pickett. Current stable consists of 1946 1/2 ton pickup turned woodie wagon with FH V8, 1947 Tonner Pickup (red) mostly stock with exception of a cummins 6at turbo diesel, 1946 Tonner Pickup (green) with 226 cu in 6 cyl flathead, 1979 Toyota landcruiser wagon, completely encased in 1947 Ford Jailbar sheet metal. Ok, cornbinder rear fenders..... 'Rusty ol' floorboards, hot on their feet' (Alan Jackson) |
01-13-2022, 09:32 PM | #12 | |
Senior Member
Join Date: May 2010
Location: now Kuna, Idaho
Posts: 3,774
|
Re: Moog kingpins
Quote:
|
|
01-13-2022, 09:57 PM | #13 |
Senior Member
Join Date: Jan 2014
Location: Orcas Island Washington
Posts: 4,844
|
Re: Moog kingpins
Odd, it says made in USA on the box. And the bearings...... I think my bushings just have a different look. Since when was MeHico part of the US? OH, of course there is Mexico Maine. Not to overlook Rome Georgia, Athens Texas and Paris Tenesee. https://www.youtube.com/watch?v=caQ8a4hLiaM
__________________
Owner/Operator of 'Jailbar Ranch' on the side of Mt. Pickett. Current stable consists of 1946 1/2 ton pickup turned woodie wagon with FH V8, 1947 Tonner Pickup (red) mostly stock with exception of a cummins 6at turbo diesel, 1946 Tonner Pickup (green) with 226 cu in 6 cyl flathead, 1979 Toyota landcruiser wagon, completely encased in 1947 Ford Jailbar sheet metal. Ok, cornbinder rear fenders..... 'Rusty ol' floorboards, hot on their feet' (Alan Jackson) Last edited by GB SISSON; 01-13-2022 at 10:07 PM. |
01-13-2022, 10:07 PM | #14 |
Senior Member
Join Date: Jan 2011
Location: sw minnesota
Posts: 4,541
|
Re: Moog kingpins
Wife will be angry at some point when her spoon is wore out
|
01-13-2022, 10:24 PM | #15 |
Senior Member
Join Date: Jan 2014
Location: Orcas Island Washington
Posts: 4,844
|
Re: Moog kingpins
Gonna epoxy it back together and she'll never be the wiser.
__________________
Owner/Operator of 'Jailbar Ranch' on the side of Mt. Pickett. Current stable consists of 1946 1/2 ton pickup turned woodie wagon with FH V8, 1947 Tonner Pickup (red) mostly stock with exception of a cummins 6at turbo diesel, 1946 Tonner Pickup (green) with 226 cu in 6 cyl flathead, 1979 Toyota landcruiser wagon, completely encased in 1947 Ford Jailbar sheet metal. Ok, cornbinder rear fenders..... 'Rusty ol' floorboards, hot on their feet' (Alan Jackson) |
01-14-2022, 10:55 AM | #16 | |
Senior Member
Join Date: Jan 2012
Location: Lyman,ME.
Posts: 2,612
|
Re: Moog kingpins
Quote:
__________________
I'm thinkin' about crankin' My ragged ol' truck up and haulin' myself into town. Billy Joe Shaver |
|
01-14-2022, 11:34 AM | #17 |
Senior Member
Join Date: Jan 2014
Location: Orcas Island Washington
Posts: 4,844
|
Re: Moog kingpins
Now that's exactly what I was talking about! So in Maine there are no 'supply chain' issues with stuff produced in Mexico or China. You just jump in yer ragged ol truck and pick it up in person.
__________________
Owner/Operator of 'Jailbar Ranch' on the side of Mt. Pickett. Current stable consists of 1946 1/2 ton pickup turned woodie wagon with FH V8, 1947 Tonner Pickup (red) mostly stock with exception of a cummins 6at turbo diesel, 1946 Tonner Pickup (green) with 226 cu in 6 cyl flathead, 1979 Toyota landcruiser wagon, completely encased in 1947 Ford Jailbar sheet metal. Ok, cornbinder rear fenders..... 'Rusty ol' floorboards, hot on their feet' (Alan Jackson) |
01-14-2022, 04:51 PM | #18 |
Senior Member
Join Date: Jan 2012
Location: Lyman,ME.
Posts: 2,612
|
Re: Moog kingpins
Ya can’t get theya from heya …..ya gotta go someplace else and start theya…..Mark
__________________
I'm thinkin' about crankin' My ragged ol' truck up and haulin' myself into town. Billy Joe Shaver |
01-14-2022, 04:55 PM | #19 |
Senior Member
Join Date: Oct 2012
Location: Eastcoast
Posts: 859
|
Re: Moog kingpins
Rock auto also has Moog king pins kits 8350B about $50
|
01-14-2022, 10:20 PM | #20 |
Senior Member
Join Date: May 2010
Location: now Kuna, Idaho
Posts: 3,774
|
Re: Moog kingpins
|
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|