|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
01-06-2024, 07:57 PM | #1 |
Senior Member
Join Date: Sep 2015
Location: Welcome NC
Posts: 207
|
28 roadster rumble seat bolts
Does anyone know the size of the bolts that hold the back rumble seat to the deck lid. My bolts are missing and I can not find them with any of our suppliers. Seat will not stay in place without them and I am to old to climb in back there.
|
01-06-2024, 09:43 PM | #2 |
Senior Member
Join Date: May 2010
Location: Auburn Washington
Posts: 2,552
|
Re: 28 roadster rumble seat bolts
they are a special step bolts Snyder`s sell a kit A-41543-MB
I guess i need to better before responding. the two screws for the bottom of the back Cushing are 12-24`s m b Last edited by jw hash; 01-07-2024 at 09:34 AM. |
Sponsored Links (Register now to hide all advertisements) |
|
01-07-2024, 03:32 AM | #3 | |
Senior Member
Join Date: May 2010
Posts: 1,647
|
Re: 28 roadster rumble seat bolts
Quote:
If you're referring to the mounting of the seat back assembly to the inner rumble lid panel, there are (or should be) 4 clips/brackets on the base of the seat spring assembly The two clips on the top fit into slots in the inner deck lid, while the lower clips get screwed to the inner lid. Old thread with more information: https://www.fordbarn.com/forum/showthread.php?t=9330 |
|
01-07-2024, 12:59 PM | #4 |
Senior Member
Join Date: Sep 2015
Location: Welcome NC
Posts: 207
|
Re: 28 roadster rumble seat bolts
A guy on VFF has basically the same problem as me. The bolts are basically 12-24 or 12-24 D from what I have read. Just need to locate bolts some where.
|
01-08-2024, 06:28 AM | #5 |
Junior Member
Join Date: Dec 2021
Posts: 15
|
Re: 28 roadster rumble seat bolts
I would try boltdepot.com. I don’t know the head style you are looking for but they have a lot of 12-24 slotted screws available. I have used them for a few things and they may be able to help.
|
01-08-2024, 10:55 AM | #6 |
Senior Member
Join Date: May 2010
Location: NJ
Posts: 6,181
|
Re: 28 roadster rumble seat bolts
Sponsored Links (Register now to hide all advertisements)
|
01-09-2024, 11:16 AM | #7 |
Senior Member
Join Date: Sep 2015
Location: Welcome NC
Posts: 207
|
Re: 28 roadster rumble seat bolts
Just trying to find bolts that hold seat cushion to the rumble seat lid.
|
01-09-2024, 07:32 PM | #8 |
Senior Member
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 16,436
|
Re: 28 roadster rumble seat bolts
I do believe that Ford used pan or round head slotted screws for the lower retaining fasteners. I'm using screws that are about the same as used for some of the firewall clips. My rumble seat back cushion spring assembly has the lower attach flanges that have rather large slots in them. I had to use washers on the screws to give better support. The attach flanges are riveted on to the spring structure and are made of pretty thick metal. Bolts with a hex head in a 12-24 thread might be harder to source.
Last edited by rotorwrench; 01-09-2024 at 07:37 PM. |
01-12-2024, 09:21 PM | #9 |
Senior Member
Join Date: Sep 2015
Location: Welcome NC
Posts: 207
|
Re: 28 roadster rumble seat bolts
That kit is not for the back seat to rumble seat lid.
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|