Go Back   The Ford Barn > General Discussion > Late V8 (1954+)

Sponsored Links (Register now to hide all advertisements)

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 05-06-2015, 04:11 PM   #1
modelamike65
Junior Member
 
Join Date: Jan 2013
Location: Washington State
Posts: 6
Default '56 T-Bird rear spring removal

My problem is removal of the front bolt that secures the rear spring. I have released the rear shackle connections and released the spring from the rear axle and removed the nut from the front bolt that holds the spring. So there is no pressure anywhere along the spring. I am unable to even turn the front bolt that goes through the frame, the spring bushing and spring bracket. Has that bolt been pressed in place to cause this problem? When I pound on the end of the bolt with a punch and hammer, it sounds and feels like it is part of the frame.
modelamike65 is offline   Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 07:12 AM.