07-08-2020, 01:48 PM | #1 |
Senior Member
Join Date: May 2010
Location: muskegon, mi
Posts: 294
|
wiring harness
no lights, no horn. question the business end of the harness is a round disc with 9 terminals. those terminals are in 3 groups of three looking at the back side it looks like each set is tied together. so if i put one wire from an ohm meter on one wire in the back should i get continuity when i put the other wire from the meter on each of the nine terminals on the front?
|
07-08-2020, 02:49 PM | #2 |
Senior Member
Join Date: Jan 2019
Location: Germany, near Aachen
Posts: 1,153
|
Re: wiring harness
No. The current is directed to the individual contacts via the three point-shaped brass contact plate that you can turn from the steering wheel.
__________________
Beste Gruesse aus Deutschland, Werner Ford Model A, Roadster, 1928 Citroen 11 CV, 1947 Hercules W 2000, 1976; (with NSU-Wankel Rotary Engine), Canadian version |
Sponsored Links (Register now to hide all advertisements) |
|
07-08-2020, 03:07 PM | #3 |
Senior Member
Join Date: May 2010
Location: muskegon, mi
Posts: 294
|
Re: wiring harness
Ok are you saying I should not get continuity on all nine front terminal s? Thanks for the response.
|
07-08-2020, 03:55 PM | #4 |
Senior Member
Join Date: May 2010
Location: So Cal
Posts: 8,741
|
Re: wiring harness
The three terminals for the tail light are hooked together and the three terminals for the battery are hooked together. The three for the headlights are not.
|
07-09-2020, 11:37 AM | #5 |
Senior Member
Join Date: Dec 2017
Location: Guthrie, OK
Posts: 1,144
|
Re: wiring harness
No lights or horn means the two yellow wires are open at the cutout terminal (running). If not running, could be open at the firewall or ammeter (or fuse).
|
07-09-2020, 03:11 PM | #6 |
Senior Member
Join Date: Jan 2019
Location: Germany, near Aachen
Posts: 1,153
|
Re: wiring harness
Sponsored Links (Register now to hide all advertisements)
__________________
Beste Gruesse aus Deutschland, Werner Ford Model A, Roadster, 1928 Citroen 11 CV, 1947 Hercules W 2000, 1976; (with NSU-Wankel Rotary Engine), Canadian version |
07-12-2020, 04:27 AM | #7 |
Senior Member
Join Date: May 2010
Location: muskegon, mi
Posts: 294
|
Re: wiring harness
Like always good helpful info.
Thanks |
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|